Home > Masonry > Shop By Project Type >

MasonrySaver Cleaner and Degreaser - 1 Gallon
MasonrySaver Cleaner and Degreaser - 1 Gallon


 
Our Price: $27.10

Availability:: Usually Ships in 24 to 72 Hours
Product Code: 0905738128
Qty:

Description
 
Masonry Cleaner & Degreaser is a super concentrated alkaline based cleaner formulated to clean a variety of masonry surfaces including concrete, brick and stone.

MasonrySaver Cleaner & Degreaser penetrates deep into the substrate to remove petroleum-based contaminants such as oils, dirt, grime and even efflorescence. MasonrySaver Cleaner & Degreaser is an environmentally safe, biogradable alternative to other harsher products, such as phosphoric acid or acid-based cleaners.
Product Uses

MasonrySaver Cleaner & Degreaser cleans these surfaces: loading docks, garage floors, driveways, parking garages, industrial floors, machine shops, and auto repair faciilities.

Limitations: DO NOT USE ON COMPOSITE FLOORS, WATER-BASE PAINTED SURFACES OR ALUMINUM.

Benefits

  • Non-Toxic

  • Deep Penetration

  • Will not harm drains, plants or environment

  • Pleasant odor

  • Industrial Floors

  • Does not leave residue


  • Directions

    Dilution: Mixing: Use 10 parts water to 1 part MasonrySaver Cleaner & Degreaser to clean:

    • Counter Tops

    • Bathrooms

    • Linoleum

    • Tile Floors

    • Boats

    • Painted Walls

    • Woodwork

    • Automobiles

    • Storm Doors

    • Garbage Cans


    Full Strength: Use MasonrySaver Cleaner & Degreaser to clean:

    • Floor Wax

    • Smoke Film

    • Finger Prints

    • Hell Marks

    • Grease

    • Ovens


    Application

    For general cleaning of dirt, grim, spots and stains, simply spray MasonrySaver Cleaner & Degreaser on the area to be cleaned, wait a minute or two and wipe off. For oil staining on concrete floors and driveways, do not dilute the product or pre-wet the surface. Apply MasonrySaver Cleaner & Degreaser full strength by pouring or spraying the areas to be cleaned. Work the cleaner into the stained area using a stiff broom or nylon brush. Allow the product to work for approximately 20-30 minutes before rinsing. Rinse with clean water. Rinsing with high pressure water and with heated water will expedite cleaning. For severe stains, multiple applications of cleaner may be needed.

Share your knowledge of this product. Be the first to write a review »